Partners
for further assistances on your concrete solutions you need, please fill out the form below and our expert sales rep will be in touch immediately!
LOCATIONS
SubCo Spazio 1st Floor
for further assistances on your concrete solutions you need, please fill out the form below and our expert sales rep will be in touch immediately!
SubCo Spazio 1st Floor
Description
STRUX® 90/40 is a unique, high strength, high modulus, synthetic macro fibre reinforcement that is added to ready mixed and precast concrete at the batching stage. STRUX® 90/40 controls drying shrinkage cracking, so it can be used as an alternative to steel mesh and steel fibre reinforcement.
Applications :
• Ground bearing floor slabs
• Ground bearing external pavements.
• Marine concrete applications
• Precast concrete
Product Advantages :
• Controls drying shrinkage cracking by controlling the propagation of micro-cracking thus improving toughness and durability of concrete.
• Can be used as an alternative to steel mesh reinforcement and steel fibre reinforcement.
• Uniformly distributed throughout the concrete matrix - no risk of incorrect steel mesh reinforcement placement.
• Improves residual flexural strength, impact and fatigue resistance of concrete - Re,3 values in excess of 30% can be reliably achieved (see UK Concrete Society Technical Report 34, 3rd Edition).
• Removes a site process so saves time on construction programme.
• No steel mesh storage, fixing, movement or crane costs.
• Ready-mix concrete truck can back up and freely discharge concrete which could remove/reduce pumping costs.
Description
MCI®-2005 NS (normal set) is a water-based, organic, corrosion inhibiting admixture for protection of metallic reinforcement in concrete structures.
Features :
• Biobased (27%).
• Lower toxicity and environmental impact than traditional corrosion inhibiting admixtures such as calcium nitrite.
• Low dosage rate with minimal effect on concrete properties (i.e. workability, strength development, air entrainment, etc..
• Single dosage rate which is independent of expected exposure to chlorides.
• Ability to migrate through porous substrates (concrete, masonry, limestone, etc.) by capillary action, vapor diffusion and ionic attraction.
Description
MCI-2020 is a surface applied, migrating corrosion inhibitor designed to penetrate through cementitious materials including concrete, mortar, and limestone. MCI-2020 migrates in both liquid and vapor (gas) phases through the pore structure, forming a protective, molecular layer on embedded reinforcement. MCI-2020 provides corrosion protection against carbonation, chlorides, and other contaminants. MCI-2020 V/O is a high viscosity version of MCI-2020 which is specifically designed for vertical and overhead applications.
Features :
• Protects against corrosion caused by carbonation, chlorides, and other aggressive contaminants.
• Effectively reduces corrosion rates on metals with existing corrosion.
• ANSI/NSF Standard 61 Approval for structures containing potable water
• Water based and non-flammable.
• Does not etch, stain, discolor, or otherwise harm glass, metals, or automotive paint.
• Does not contain calcium nitrite.
• Does not contain wax.
• Does not require removal of sound concrete.
• Allows vapor diffusion (not a vapor barrier).
• Easily applied by spray, brush, or roller.
• Minimal curing time, traffic may resume minutes after application if necessary (dry to touch).
• Migrates independent of orientation (horizontal, vertical, overhead)
• Migrates up to 3 inches in 30 days
• Proven performance in both lab and field testing
• MCI-2020 V/O available for vertical and overhead
Description
Bostik Seal ‘N’ Flex Premium is a high modulus, high performance polyurethane sealant and flexible adhesive in one . Seal ‘N’ Flex Premium will not form bubbles during its curing process and remains permanently elastic.
Key Features & Benefits :
• Elastic adhesive and sealant in one.
• High mechanical resistance.
• Zero bubbling.
• Perfect adhesion without primer to most substrates.
• Approved fuel/acid/solvent resistance certification.
Movement Capability of C50 (primer less, M, A) Application Areas :
• Floor joint sealing (pedestrian.
• Heavy traffic areas that need fuel & chemical resistances.
e.g. airport runway, petrol station, hangar etc.
• Adhesive for general construction materials.
• Pre cast panel and other high movement joints.
Copyright 2021 Kiluan Bangun Selaras.